{{ $t('shop.all.spaetbestellservice.hinweis') }}
Valve function | 3/2 closed monostable |
Actuation type | Electrical |
Build.width [mm] | 15 |
Normal nominal flow [l/min] | 18 |
Operating pressure [bar] | 0 to 10 |
Reset mode | Mechanical spring |
Protection category | IP65 |
Sealing principle | Soft |
installation position | arbitrary |
Complies to standard | ISO 15218 |
Hand assist actuation | tentative |
Control type | Direct |
Flow direction | Not reversible |
Überdeckung | negative Überdeckung |
Shifting time off [ms] | 6 |
Shifting time on [ms] | 6 |
Power-on time | 100 % |
Coil characteristic value | 110 V AC: 50/60 Hz, pull-in power 2.9 VA, holding power 2.1 VA |
Permitted voltage oscillations | -15 % / +10 % |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Corrosion resistant class KBK | 2 - moderate corrosion stress |
Medium temperature [°C] | -10 to 50 |
ambient temperature [°C] | -10 to 50 |
Electrical connection |
Wiring diagram Form C acc. to EN 175301-803, acc. to DIN EN 175301-803 |
Pneumatic connection 1 | Connection plate |
Pneumatic connection 2 | Connection plate |
Pneumatic connection 3 | Connection plate |
Material information | RoHs compliant |
Seals material | NBR |
CE certificate (see declaration of conformity) | to EU low voltage directive |
Information about force dynamic sampling | Switching frequency at least 1x per week |
Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
{{ $t('shop.all.gewicht') }} | 49 g / Szt. |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Wystąpił błąd; wczytaj stronę jeszcze raz i spróbuj ponownie.